Factory source SAIXIN shuttering magnet 600 KGS with step for Benin Factory
SX – 600 magnetic box is designed for fixed Angle edge mode and the development of magnetic fixture. With 10 mm height can direct pressure on the edge of the Angle steel bottom, the steps of light by the magnetic switch box can make the magnetic box firmly sucked on the platform, operation simple and convenient, economical and practical.
Unlike SX – 600 single magnetic box, the box of take steps length is 210 mm, please according to the customer side mode and platform to choose to use the distance, of course, we can also modify the length to 200 mm, have different requirements, please contact!
KEY BENEFITS OF SHUTTERING MAGNETS:
1. Reducing the complexity and time of the installation of formwork (up to 70%).
2. Universal use for mass production of concrete products, and piece products of all forms on the same steel table.
3. Eliminates the need for welding, shuttering magnets does not damage the steel table.
4. Makes it possible to produce radial products.
5. A small cost of a set of magnets. The average payback of about 3 months.
6. The main advantage of the shuttering magnets is that you do not need to have a lot of different forms for different products, you need to have a set of magnets, adapters for different height boards and steel table.